More Views

Winch CS

Ref.: CS

From* 

67,35 € Incl. VAT

Compact lifting winch:
- Load up to 200 kg
- Use without cable or strap
- Handle: removable or fix depending on model
- Silent mechanism/worm drive
- Black cataphoresis coating/anti-corrosion protection
European standard EN13157-A1
Horizontal or lateral setup
Removable handle
Noise-free winch

In stock

Review the right Goliath model for your application
YOUR RESULTS
Please fill in the form
Print

The result is expressed for a 12kg effort on the handle

Maximum recommended effort for a regular use.
Image Name Model Last layer use value (kg) Cable 1 Ø (mm) / length (m)  Cable 2 Ø (mm) / length (m)  Type of winch Price Goliath-Store* Action
Winch CS100 PF63201 80 ø3/9m - Cable/Fix Hand.
-
More information Reseller personalised quote
Winch CS100
  • Pulling capacity : -
  • Number of speeds : 1
  • Reduction ratio 1 : 43107
  • Reduction ratio 2 : -
  • Reduction ratio 3 : -
  • Drum hub ø : 27mm
  • Brake : auto frenante
  • Minimum weight (KG) : 10kg
  • Cable 1 Ø (mm) / length (m)  : ø3/9m
  • Strap length : -
  • Cable 2 Ø (mm) / length (m)  : -
  • Winch weight : 2kg
  • Number of winches per masterpack (pro) : 10
  • Type of winch : Cable/Fix Hand.
  • Handle length (mm) : 155mm
  • Handle : Fixed
Winch CS100MD PF63202 80 ø3/9m - Cable/Rem. Hand
-
More information Reseller personalised quote
Winch CS100MD
  • Pulling capacity : -
  • Number of speeds : 1
  • Reduction ratio 1 : 43107
  • Reduction ratio 2 : -
  • Reduction ratio 3 : -
  • Drum hub ø : 27mm
  • Brake : auto frenante
  • Minimum weight (KG) : 10kg
  • Cable 1 Ø (mm) / length (m)  : ø3/9m
  • Strap length : -
  • Cable 2 Ø (mm) / length (m)  : -
  • Winch weight : 2kg
  • Number of winches per masterpack (pro) : 10
  • Type of winch : Cable/Rem. Hand
  • Handle length (mm) : 155mm
  • Handle : Removable
Winch CS200 PF63301 100 ø4/2m ø3/4m Cable/Fix Hand.
-
More information Reseller personalised quote
Winch CS200
  • Pulling capacity : -
  • Number of speeds : 1
  • Reduction ratio 1 : 1/14
  • Reduction ratio 2 : -
  • Reduction ratio 3 : -
  • Drum hub ø : 27mm
  • Brake : auto frenante
  • Minimum weight (KG) : 10kg
  • Cable 1 Ø (mm) / length (m)  : ø4/2m
  • Strap length : -
  • Cable 2 Ø (mm) / length (m)  : ø3/4m
  • Winch weight : 2kg
  • Number of winches per masterpack (pro) : 10
  • Type of winch : Cable/Fix Hand.
  • Handle length (mm) : 155mm
  • Handle : Fixed
Winch CS200MD PF63302 100 ø4/2m ø3/4m Cable/Rem. Hand
-
More information Reseller personalised quote
Winch CS200MD
  • Pulling capacity : -
  • Number of speeds : 1
  • Reduction ratio 1 : 1/14
  • Reduction ratio 2 : -
  • Reduction ratio 3 : -
  • Drum hub ø : 27mm
  • Brake : auto frenante
  • Minimum weight (KG) : 10kg
  • Cable 1 Ø (mm) / length (m)  : ø4/2m
  • Strap length : -
  • Cable 2 Ø (mm) / length (m)  : ø3/4m
  • Winch weight : 2kg
  • Number of winches per masterpack (pro) : 10
  • Type of winch : Cable/Rem. Hand
  • Handle length (mm) : 155mm
  • Handle : Removable
Image
Model
PF63201
Last layer use value (kg)
80
Cable 1 Ø (mm) / length (m) 
ø3/9m
Cable 2 Ø (mm) / length (m) 
-
Type of winch
Cable/Fix Hand.
Price Goliath-Store*
-
More information
Action
Image
Model
PF63202
Last layer use value (kg)
80
Cable 1 Ø (mm) / length (m) 
ø3/9m
Cable 2 Ø (mm) / length (m) 
-
Type of winch
Cable/Rem. Hand
Price Goliath-Store*
-
More information
Action
Image
Model
PF63301
Last layer use value (kg)
100
Cable 1 Ø (mm) / length (m) 
ø4/2m
Cable 2 Ø (mm) / length (m) 
ø3/4m
Type of winch
Cable/Fix Hand.
Price Goliath-Store*
-
More information
Action
Image
Model
PF63302
Last layer use value (kg)
100
Cable 1 Ø (mm) / length (m) 
ø4/2m
Cable 2 Ø (mm) / length (m) 
ø3/4m
Type of winch
Cable/Rem. Hand
Price Goliath-Store*
-
More information
Action
Additional information
Description

GOLIATH has been designing and making, for more than 30 years, winches that are used in a great number of industries.

The manual winch is a safety device governed by strict technical rules and whose design is framed by the European standard EN13157 A1.

Here are some criteria to be taken into account to select the right winch.

Lifting concept

Always select a brake winch.

According to the European standard EN13151 A1, a lifting application is characterised by the lifting of a load in connection with a vertical and/or horizontal movement. Thus, towing a car on a trailer, for example, is a lifting operation.
The winch associated with this operation must be compliant with the standard EN13157 A1 to be EC marked. It must in particular have a permanent safety brake when loaded (as the range of ratchet winches does not have a self-braking system, it is therefore not suitable for lifting applications). This device is crucial to ensure your safety and the compliance of your facilities.

The winch safety brake makes it possible to hold the load when all action on the handle is stopped. The latest generation of GOLIATH safety brakes (internal, permanent and independent from the handle) of the TPV,TA and TS winches offer constant safety, including when the handle is removed (prevents unauthorised access to the winch).

Pulling on an inclined plane: Pulling on an inclined plane is a lifting operation

Whether the load is self-supported or not, the force, and so the winch capacity, can significantly vary (from 1 to 5 depending on the case). The load capacity we provide in our datasheets for this type of application takes into consideration a slope of 20% and friction coefficients corresponding to those of a vehicle equipped with bearings.

Force on the handle: 12 kg maximum recommended

Quality winches designed in compliance with the European standard EN13157 A1, are provided for a maximum load capacity with a force on the handle that cannot exceed 25 kg first layer and last layer load).
This is a rated capacity and not a capacity of use. In general, one considers that a 12 kg force on the handle is acceptable. To obtain this maximum force level, the load on the winch should be limited to approximately 50% of its rated value.

Please note that the latest generation of TPV-TA winches are equipped with 2 reduction axes making it possible, according to uses, to divide the force on the handle by 2. See the new generation of TA-TPV winches

Capacity: The wound cable length has an impact on the winch capacity

The load capacity of the winch (100% force applied directly to the cable) depends on the cable winding level on the drum. In fact, the mechanical force transmited by the cable to the winch proportionally increases with the winding of the latter on the drum. In other words, the more the load is lifted, the more the transmitted force is significant, thereby reducing the capacity of the winch. For this reason, the standard considers a first layer and a last layer load:

  • 1st layer (drum pitch diameter diagram)

The first layer is the minimum filling level of the drum. The load capacity of the winch given for a 25 kg force on the handle is then maximum, but is not a use value, as the winch cannot be used with this load (lifting/winding capacity equal to 0).

  • Last layer (full drum diagram)

The maximum last layer load value, still for a 25 kg force on the handle, is the maximum capacity of the winch if the cable is completely wound on the drum.

Consequently, the winch capacity will depend on the cable length wound on the winch when the load is lifted to the maximum. To optimise this value and select the winch best suited for the application, it is necessary to limit the cable length wound on the drum to strictly: lifting height + 1 metre (minimum safety winding on the drum). Our Goliath Store configurator allows you to carry out simulations and indicates the references best suited for your application.

Cables: Adhere to the recommended diameters

Each winch is determined according to a cable diameter adapted to its capacity. It is then recommended for optimum use of the winch to use the corresponding cable. A cable with a close diameter can eventually be used. WARNING! In this case, the winch capacity will eventually be reduced proportionally to the difference in breaking capacity of the cable.

WARNING-DANGER: Please note that ratchet winches are designed to be ideally used with a strap. In fact, as the drum diameter is often inferior to 30 mm, cables with a diameter superior to 4 mm have a radius of curvature which is too constrained and which breaks the steel fibre, causing the cable to break early.


  WARNING-DANGER:
The use of a sheave pulley with a diameter which is not appropriate for the cable also causes the cable to break early.

Protective cover: Compulsory to be compliant with the EC standard and for your safety

It is imperative that the winch be equipped with a protective cover preventing access to the mechanism in order to avoid any accident.

OEM

Since the 1980s, GOLIATH has gradually become the leading European manufacturer of manual winches. Our products, known for their quality, are distributed in all industries and integrated in numerous lifting products.

Our sustained investments in R&D for more than 10 years allowed us to launch new products every year. The Goliath range has thus become the most complete and competitive offer in terms of manual winch on the market, whether it concerns standard winches or lifting solutions dedicated to an application.

AN EXTENSIVE OEM APPLICATION EXPERIENCE

Our industrial flexibility, associated with a significant component library, allow us to offer, at low cost and within a limited time, lifting solutions suitable for the needs of integrators.

Our technical expertise in a great number of industries and applications allows us to easily adapt to OEM needs, with an industrial customisation approach.

Technical tailor-made solutions for industrial volumes (from 100 pieces a year, and for more significant systems up to several thousand units).

Winch solutions

We provide integrators with customised solutions by adapting our winches (handle lengths, accessories, mounting system, additional handles, etc.) or by creating tailor-made products (reduction, size from our standard or modified component libraries according to specifications).

Telescopic solutions and hoist arms

Our telescopic masts are available in standard or customised version up to 6 metres and 300 kg-load according to requirements. Our solutions also integrate accessories and mounting systems.

We also make hoist arm and davit systems in steel, aluminium, or stainless steel intended for handling various equipment.

Lifting system solutions

Talbot Industrie provides overall lifting solutions intended to equip vehicles or industrial handling systems.

MOBILE SOLUTIONS

Talbot Industrie is also a manufacturer of trailers and offers tailor-made combined mobile lifting solutions, including lighting management solutions, material handling, building equipment and installation assistanc

Define/ configurate

Winch configurator: how to use it

In order to help you determine the best winch for your application, Goliath Store puts at your disposal a configurator assistant which, from a few simple questions, will allow you to identify the standard winch best suited to your needs.

Please find below additional explanations to use properly the configurator assistant. It should be noted that the configurator assistant cannot take into account all the specific parameters of your applications.

Load definition

The load held is the sum of the forces applied to the cable, which transmits them to the winch. The load itself should be considered, as well as the mechanical systems, frictions, return pulleys, etc. which are linked to the load. The value of the rated load can eventually be reduced when it is self-supported (e.g.: pulling a rolling load on an inclined plane). To determine accurately these forces, you can use a dynamometer directly attached to the end of the pulling cable.

Select "lifting", for applications in which the force (of the load) is 100% applied to the cable.

Select "pulling", for applications in which the pulled load rolls or slides on an inclined plane (we use a standard value of 20% of inclination. As a reminder, this application is considered by standard EN13157 A1 as a lifting operation!).

Lifting height

Strictly indicate the lifting height or the pulling distance in metres (in the latter case, 1 m of compulsory winding must be added on top).

Otherwise, indicate the cable length you would like to wind on the winch when the lifting or towing operation is complete (maximum winding length).

Result

According to the input data, the configurator assistant offers a winch corresponding to the need indicated. It is possible that several solutions are provided when there are several options for the same size/capacity (for example for the TA-TPV range, different options are possible: wall mounting, double shaft, etc.).

Standards and safety

The EN13157 A1 standard defines the essential criteria required to ensure your safety and justify the CE mark on winches (in the context of European use).

Warning ! Affixing the CE mark may be linked to self-certification by the importer or manufacturer, which unfortunately leads to misuse of its use and therefore of CE conformity of the products. Be careful.

A winch that does not comply with EN13157 A1 is not CE, thus making the lifting device not in compliance with the provisions of the Machinery Safety Directive that engages your responsibility.

Below you will find some essential requirements for the CE qualification of a winch. Of course, the qualification cannot be summarized in such few lines. Our objective here is to allow a visual identification of the key elements of conformity :

  • Automatic brake: Self-braking is mandatory for any lifting application. As a reminder, standard EN13157 A1 defines lifting as a change of height during movement. This can integrate all combinations of vertical and/or horizontal movements of the load.
  • Crank: It must not be disassembled when the activation of the braking system depends on it.
  • Safety cover: The inner and outer components and the protruding parts of the system (e.g. the drum) must be protected.
  • Drum: The diameter of the hub of the drum varies according to the cable and measures, depending on the case, between 35 mm and 72 mm (for manual winches up to 1000 kg). Failing this, the fiber of the cable can be damaged and can lead to the breakage of the cable. In addition, the hub of the drum must resist crushing.
  • Securing the cable or the strap: The anchorage of the cable or strap on the winch must be standardized and withstand 3 times the nominal load.
  • Straps and cables: They must comply with current European and safety standards and or must be testproof. Be careful with weak straps! When damaged, their breakage could have serious consequences.
Set up
Please download at the bottom of the page the overall dimensions for installation.
Download document(s)
Close

* Required Fields

Close

Commande directe usine

* Required Fields